POLAN® AF Polyurethane Aliphatic Top Coat Paint (UV Resistant)
 

Description:
Polyurethane/aliphatic isocyanate based, double component, solventborne, UV resistant,
glossy top coating which is resistant to scratching. Has high color stability and is
mechanically resistant.
 

Application Areas:
•Indoor and outdoor
•Horizontal and vertical applications
•Concrete, steel and wooden surfaces
•Epoxy and polyurethane coverings
•Outer surfaces of vehicles such as tanks, tankers and concrete mixers
•As last coating in places open to atmopheric conditions where high UV resistance, color
permanency and glossiness is required.
 

Advantages:
•Keeps the color stable, resistant to UV, does not turn to yellow
•Resistant to atmopheric conditions
•Glossy
•Flexible, covers cracks on the surface
•Resistant to scratches, resistant to aging
•Resistant to salt water, solutions with salts, bases, diluted weak acids, gasoline and mineral
oils
•Forms a seamless and jointless surface, does not require maintenance
•Easy to apply with a airless spray gun or roller
•Easy to clean thanks to its smooth surface.
 

Consumption:
80 - 150 g/m2 for maximum 80 µ thickness in single layer (Varies depending on the
absorption and roughness of the surface, and the application method. Recommended to apply
minimum 2 layers)
 

Packaging:
Sets of 20 kg (A+B) tin cans
Technical Properties
Components : A: Polyurethane resin, B: Hardener
Color : Standard glossy RAL colors (Except metallic and phosphorous colors)
Mixture Rate : A: 16 kg, B: 4 kg Mixture Density : 1.25 ± 0.05 kg/L (23°C TS EN ISO 2811-
1) (Changes depending on the color)
Viscosity : 100 - 1100 mPas (23°C)
Bond Strength by Pull-off : > 2 N/mm2 (EN 1504-2) 7 days
Abrasion Resistance (Taber) : 75 mg, 1000 cycle (EN 1504-2)
Impact Resistance : Class III (EN 1504-2)
Capillary Absorption and Water Permeability : w < 0.1 kg/(m2 .h0.5) (EN 1062-3)
Solid Content (Mixture) : By weight 78% ± 2, by volume 67% ± 2 (Changes depending on the
color)
Flash Point : > 21°C Pot Life : 4 - 6 hours (23°C, 200 g)
Application Temperature : Between +10°C and +30°C

Dirt Pick-up Time : 20 minutes (23°C)
Dry to Touch Time : 60 minutes (23°C)
Time to Use : 8 hours (23°C)
Top Coat Time : No later than 24 hours from primer application (23°C TS 4317)
Complete Curing Time : 7 days (23°C TS 4317)