POLAN® 500 Polyurethane Coating and Waterproofing Material

Description:
Polyurethane based, single component, ready to use, UV resistant, walkable, solventborne
liquid coating and waterproofing material.

Application Areas:
•Outdoor
•Surfaces such as concrete, stone, corrugated plate, metal
•As coating material on terrace roofs, eaves trough
•Waterproofing (except contact with potable water)
•Protecting polyurethane foam applications from UV radiation.
Advantages:
•Applied perfectly on all types of surfaces, even on older coatings
• Single component and solventborne elastic material. Easy to apply. Can cover capillary
cracks
•Resistant to sunlight as it is made of UV resistant resins. Stable to depolymerization
•Provides seamless and jointless waterproofing
•Highly resistant to aging, diluted acids, bases, salt, chemicals, mould and weather conditions.
Can keep initial properties for years •Has high solid content ratio
•Resistant to plant roots
•Since it is permanently elastic, no cracking can be observed later on the surfaces applied.
After curing, it can be walked on
•Applied on single or double component polyurethane materials for protection.

 

Consumption:
400 - 700 gr/m2 on each layer (Varies depending on the absorption and roughness of the
surface.) Minimum 2 layers are applied.
Packaging:
3 kg and 25 kg tin cans

 

Technical Properties
Appearance : Off white or grey colored liquid emulsion
Density : ~ 1.40 kg/L
Application Temperature : Between +5°C and +30°C
Solid Content Ratio : ~ 90%
Bond Strength by Pull-off : ≥ 0.8 N/mm2 (TS EN 1542)
Elongation at Break : > 400% 7 days (DIN 53504)
Tensile Strength : 2.30 N/mm2
100% Modulus : 2.10 N/mm2
Hardness (Shore A) : 65 (7 days)
Walk-on Time : 16 - 24 hours (+23°C)
Service Temperature : -30°C / +90°C