AKRILAN® 600 Acrylic Based UV Resistant Flexible Liquid Membrane
Description:
Acrylic (elastomeric) resin based, single component, UV resistant, flexible waterproofing material.
Application Areas:
•Indoor and outdoor
•Horizontal and vertical surfaces
•On various surfaces such as reinforced concrete galvanized, zinc, aluminium and sheet iron
•Wet areas such as bathrooms and kitchens
•Flat and inclined roofs
•Chimney sides, gutters, eaves, drains
•Terraces and balconies.
 

Advantages:
•Ready-to-use
•Very elastic, even at low temperatures
•Applied easily and quickly with a brush or a roller
•Provides high adherence •Water vapor permeable, allows the surface to breathe
•Can be over painted with water based paints •Resistant to UV •Can be produced in various colors upon request
•Does not form joint •Does not contain solvent, nonpoisonous. Suitable for use in contact with potable water.
 

Consumption:
For 1 mm film thickness..................... 1.4 kg/m2
Terrace Roofs..................................... 3 - 4 kg/m2
Gutters............................................... 2 - 4 kg/m2 (Must be applied minimum in 2 layers. In places where higher protection is needed, it is recommended to apply 3 layers.)
 

Packaging:
5 kg and 15 kg plastic buckets
Technical Properties
Appearance : White colored acrylic copolymer liquid
Liquid Density : ~ 1.30 kg/L
Application Temperature : Between +5°C and +35°C
Elongation at Break : > 600% 14 days
Capillary Absorption and Water Permeability : w < 0.1 kg/(m2 .h0.5) (EN 1062-3)
CO2 Permeability : CO2 SD > 50 m (EN 1062-6)
Water Vapor Permeability : Class I SD < 5 (EN ISO 7783-2)
Waiting Time Between Layers: 4 hours (+20°C)
Time to Use : 5 - 7 days
Service Temperature : -20°C / +80°C